Saflok User Manual

saflok user manual, saflok reference manual system 6000, saflok instruction manual

The Anchor Tube drapes over the crossarm (or similar component) on a wooden utility pole and is placed with a Telescoping Hot Stick (1C) and attached Installation/Removal Tool (1D) to suspend the lifeline vertically for attachment of a fall arrest subsystem: Rope Grab (1E) with Shock Absorber (1F), and Full Body Harness.. Figure 1 - Saflok Pole Anchor System Item A B C D E F G H I J Description Vertical Lifeline Rope Anchor Tube Telescoping Hot Stick (purchased separately) Installation/Removal Tool Rope Grab with Shock Absorber Chain Tensioner Endless Loop Sling Carabiner Carrying Bag 2104800/802 1 1 0 1 1 0 0 1 1 2104801/803 1 1 0 1 1 1 1 2 1 DESCRIPTION: J B A G I E H I F D 1 Fall Arrest System: A system that prevents the worker from colliding with an obstruction or lower level by arresting a fall.. 2 and should be used as part of an employee training program as required by the identified agencies. HERE

1 IMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact Capital Safety.. 3 Training: This equipment is intended to be used by persons trained in its correct application and use.. Form: 5903024C Rev: C Copyright 2010, DB Industries, Inc 1 0 Application 1 1 PURPOSE: The Saflok Pole Anchor System is is a Vertical Lifeline System for use as part of a Personal Fall Arrest System (PFAS) when climbing and working on wooden utility poles (power poles, telephone poles, etc.. Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.. A Chain Tensioner (1G) and Endless Loop Sling (1H) are provided to secure the bottom end of the lifeline to the base of the pole. https://seesaawiki.jp/disphotkati/d/[BETTER] Download Kaspersky Antivirus 2010 Full Crack

2 1 Definitions and Nomenclature User for Fall Protection and Fall Arrest Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components Minimum Requirements for a Comprehensive Managed Fall Protection Program Fall Arrestors, Vertical Lifelines, and Rails 1. 3

IMPORTANT: Record the product identification information from the ID label in the Inspection and Maintenance Log in Section 9.. The Pole Anchor System consists of a dielectric Vertical Lifeline Rope (1A) passing through a formed Anchor Tube (1B). 773a7aa168 Click

These instructions must be provided to the user of this equipment The user must read and understand these instructions or have them explained to them before using this equipment. Click